VIVOTEK
User's Manual - 165
66
URL Command Document for VS8401-VVTK
8.8 Camera Control (capability.ptzenabled)
Note:
This request requires Viewer privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/viewer/camctrl.cgi?[channel=<value>][&camid=<value>]
[&move=<value>]
– Move home, up, down, left, right
[&focus=<value>]
– Focus operation
[&iris=<value>]
– Iris operation
[&auto=<value>]
– Auto pan, patrol
[&zoom=<value>]
– Zoom in, out
[&zooming=<value>&zs=<value>]
– Zoom without stopping, used for joystick
[&vx=<value>&vy=<value>&vs=<value>]
– Shift without stopping, used for joystick
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
– Click on
image
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=
<
value
>
][&spee
dlink=<value>] ]
– Set speeds
[&return=
<return page>
]
Example:
http://myserver/cgi-bin/viewer/camctrl.cgi?channel=0&camid=1&move=right
http://myserver/cgi-bin/viewer/camctrl.cgi?channel=0&camid=1&zoom=tele
http://myserver/cgi-bin/viewer/camctrl.cgi?channel=0&camid=1&x=300&y=200&resolution=704x
480&videosize=704x480&strech=1
PARAMETER VALUE
DESCRIPTION
channel
<0~(n-1)>
Channel of video source.
camid
0,<positive integer> Camera ID.
move home
Move to camera to home position.
up
Move camera up.
down
Move camera down.
left
Move camera left.
right
Move camera right.
speedpan
-5 ~ 5
Set the pan speed.