VIVOTEK
User's Manual - 35
Network
This section explains how to configure a wired network connection for the video server.
Network type
LAN
Select this option when the video server is deployed on a local area network (LAN) and is intended to be
accessed by local computers. The default setting for the Network Type is LAN. Rememer to click
Save
when you complete the Network setting.
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by
the DHCP server each time the camera is connected to the LAN.
Use fixed IP address
: Select this option to manually assign a static IP address to the video server.
1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network
Camera on LAN. Please refer to Software Installation on page 12 for details.
2. Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP.
Subnet mask: This is used to determine if the destination is in the same subnet. The default value is
“255.255.255.0”.
Default router: This is the gateway used to forward frames to destinations in a different subnet. Invalid
router setting will fail the transmission to destinations in different subnet.