Vivax Metrotech vLoc3-DM Скачать руководство пользователя страница 20

Страница: 20 / 76

™

Page 12 of 65

3 vLoc3-DM Receiver Functions and Operations

The icon

indicates that the depth of cover feature is active as below:

71.1

98Hz

25dB

0cm

0.36mA

1.27m

Re-enter the User Menu to check pipe diameter settings.
The pipeline diameter feature/depth of cover feature is enabled or disabled using the app “MyLocator3”.

Certain frequencies have an A-frame icon next to them. This icon indicates that these frequencies are

selected to be used with the fault find A-frame.

Classic Locate

– This option is only shown if the menu is entered from the Classic Screen.

Use the enter key to reveal the list of options relating to the Classic Locate mode. Options are:

Classic Locate

Peak

Null

Peak With Arrows

Broad

Delta Null

Omni Directional Peak

Omni Directional Broad

Locate Perspective

– Enter this menu to select the graphical format that the locate data will be displayed. These displays are

described further in the manual. The options are:

Locate Perspective

Classic Locate

Vector Locate
Transverse Graph
Plan View
Sonde

3.5.3

Setup - Features

Warnings

– Warnings relating to - Shallow cable, Overload, Overhead cable, and Signal Overload. Scroll down to the relevant

warning and use the return button to select or de-select.

GPS Source

- Use the Enter key to select the source of Internal or Bluetooth.

Internal

- The vLoc3-DM has a factory-installed internal GPS module. It is low accuracy, typ/-3m.

Bluetooth

- If the Blue tooth option is selected, the vLoc3-DM can be paired by Bluetooth with a more accurate GPS. More on

this is described later in this manual.

Satellite Information

- Select this option using the Enter key to see the available satellite information.

Bluetooth Pairing (if installed)

- This option allows the receiver to link with external devices such as data loggers or GPS

devices with Bluetooth capability. Press the enter button to enter the Bluetooth pairing routine.

Bluetooth Auto Connect

– When this option is enabled the receiver will automatically connect with any previously paired

Bluetooth device.

Содержание vLoc3-DM













































































Результаты поиска

Содержание vLoc3-DM

Отзывы:

Похожие инструкции для vLoc3-DM

Бренды по названию

Популярные бренды

Vivax Metrotech vLoc3-DM, Руководство пользователя

Результаты поиска

Содержание vLoc3-DM

Отзывы:

Похожие инструкции для vLoc3-DM

Бренды по названию

Популярные бренды