Vitris Portavant 80 automatic, Руководство пользователя

Страница: 8 / 38

Portavant 80 automatic 7
Revision 12/2017

Always pull on the connector housing when pulling the mains power cable
from its socket, never on the cable itself (danger to life by electric shock).

Do not attach any pictures, power sockets, switches or other objects to the
wall within the travel path of the door. Keep the travel path clear of objects
such as vases or umbrella stands. Remove skirting or door frame, if
required. Observe the regulations concerning safety clearances (see
installation instructions and section 7 "Safety analysis by the installer
according to DIN 18650 / EN 16005").

Never place ladders or other objects within the travel path if motorised
motion is imminent.

Check the settings and functionality of the Portavant 80 automatic system
after installation.

The installation described in this manual is an example. The situation on
site, the building structure or available aids or other conditions may require
alternative suitable procedures.
Caution!
The drive and control unit must not be disposed of as household refuse.
Developed in accordance with the latest safety standards:
Low kinetic energy operation in accordance with DIN 18650 / EN 16005
- Initial inspection by TÜV
- CE marking of drive unit by manufacturer
- Designation of classification in accordance with DIN 18650 by manufacturer
TÜV certificate and CE declaration are included in this manual (see section 12 "Declaration
of incorporation, Declaration of conformity and Initial inspection by TÜV").
This manual must be kept for future reference.