VITO PRO-POWER VISCC12210, Инструкция по эксплуатации

Страница: 15 / 32

EN
15
IMPORTANT:
Please read these operating and
safety instructions carefully and
completely. For your own safety,
before using this equipment check
that the fitted plug and voltage are
correct, and that all handles and
parts are firmly secured. If you are
uncertain about any aspect of using
this equipment , please contact sale
agent.
GENERAL SAFETY RULES
WARNING: When useing the
electric tools, basic safety
precautions should always be
followed to reduce the risk of fire,
electric shock and personal injury.
Please read all of these instructions
before attempting to operate this
machine. Save this manual for
future reference.
1. Keep work area environment.
Cluttered work areas invite
accidents.
2. Consider work area environment.
Do not expose power tools to rain.
Do not use power tools in damp
or wet locations. Keep work area
well lit. Do not use power tools in
the presence of flammable liquids
or gases.
3. Guard against electric shock.
Avoid body contact with earthed
or grounded surfaces (e.g. pipes,
radiators, ranges, refrigerators) .
4. Keep other people away. Do not
let others, especially children, come
close to the work, and touch the
power tools or the extension lead.
Keep them away from the work
area.
5. Store idle tools. When not in
use, tools should be stored in a dry
locked-up place, out of reach of
children.
6. Do not force the power tool. It
will do the job better and safer at
the rate for which it was intended.
7. Use the right power tool. Do not
force small tools to do the job of a
heavy duty tool. Do not use power
tools for purposes not intended; for
example do not use circular saws
to cut tree limbs or logs.
8. Dress properly. Do not ware
loose clothing or jewellery, the can
be caught in moving parts. Non-skid
footwear is recommended when
working outdoors. Wear protective
hair covering to contain long hair.
9. Use protective equipment. Use
safety glasses. Use face or dust
mask if working operations create
dust.
10. Connect dust extraction
equipment. If the power tool is
provided for the connection of dust
extraction and collection equipment,
ensure these are connected and
properly used.
11. Do not abuse the cord. Never
yank the cord to disconnect it from
the socket. Keep the cord away
from heat, oil and sharp edges.
12. Secure work. Where possible,
use clamps or a vice to hold the
work. It’s much safer than using
your hand.
13. Don’t over reach. Keep proper
footing and balance at all times.
14. Maintain tools with care. Keep
cutting tools sharp and clean for
better and safer performance.
Follow instructions for lubricating
and changing accessories. Inspect
tool cords periodically and, if
damaged, have them repaired by
and an authorised service facility,
Inspect extension cord periodically
and replace immediately if
damaged. Keep handles dry, clean
and free from oil and grease.
15. Disconnect tools. When not
in use, before and servicing and
when changing accessories such as
blades, bits, cutters, disconnect tool
from the power source.
16. Remove adjusting keys and
spanners. Form the habit of
checking to see the keys and
adjusting spanners are removed
from the power tool before turning
it on.
17. Avoid unintentional leads. Ensure
switch is in “OFF” position when
plugging in.
18. Use outdoor extension leads.
When the power tool is used
outdoors, use only extension cords
intended for outdoor use and so
marked.
19. Stay alert. Watch what you are
doing. use common sense and do
not operate the
power tools when you are tired.
20. Check damaged parts. Before
futher use of tool, it should be
carefully checked to determine that
it will operate properly and perform
the intended function. Check for
alignment of moving parts,
mountings and any other
components that may affect its
operation. A guard or other
part that is damaged should be
properly repaired or replaced
by an authorised service centre
unless otherwise indicated in this
instruction manual.
Have defective switches replaced
by an authorised service centre. Do
not use the tool if the switch does
not turn it on and off.
21. WARNING. The use of any
accessory or attachment other than
one recommended in this instruction
manual may present a risk of
personal injury.
22. Have your tool repaired by
a qualified person. This electric
tool complies with relevant safety
rules. Repairs using original spare
parts. Otherwise this may result in
considerable danger to the user.
Health Advice.
WARNING: When sawing, dust
particles will be produced. In
some instances, depending on the
materials you are working with, this
dust can be particularly harmtul to
you (e.g. lead from old gloss paint).
You are advised to consider the risk
accociated with the materials you
are working with and to reduce the
risk of exposure.
You should:
- Work in well-ventilated area.
- Work with approved safety
equipment, such as dust masks
that are specially designed to filter
microscopic particles.