Vitek VT-1216 VT, Инструкция по эксплуатации

Страница: 7 / 32

7
ENGLISH
•
Before you take the iron away for storage,
make sure that there is no water in the water
tank (10) and that the iron soleplate (11) is
completely dry.
CLEANING AND CARE
• Before cleaning the iron, make sure that it is
unplugged and has cooled down completely.
•
Clean the iron body with a slightly damp cloth
and then wipe it dry.
• Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solution.
•
After removing scale, wipe the soleplate sur-
face with a dry cloth.
• Do not use abrasive substances and solvents
to clean the iron soleplate and body.
•
Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
•
Before you take the iron away for storage,
clean it and drain all the remaining water from
the water tank (10).
•
Set the temperature control knob (7) to the
«
MIN » position, and the continuous steam
supply knob (3) to the position « 0 » (continu-
ous steam supply is off).
•
Wind the power cord around the base (9).
•
Store the iron vertically in a dry cool place out
of reach of children.
DELIVERY SET
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Power consumption: 2200 W
The manufacturer reserves the right to change
the specifications of the unit without a preliminary
notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
VT-1216.indd 7 26.11.2014 10:10:37