VITEK VTC-TNB2LPR
34
in the video. The tilt angle should range from -5° to 5°.
If the captured license plate does not meet the above requirement, you can adjust the pan angle of
the camera to correct it.
4.6
Network Configuration
4.6.1
TCP/IP
Go to Config
à
Network
à
TCP/IP interface as shown below. There are two ways for network
connection.
Use IP address (take IPv4 for example)-
There are two options for IP setup: obtain an IP address
automatically by DHCP and use the following IP address. Please choose one of the options as
needed.
Test: Test the effectiveness of the IP address by clicking this button.
Use PPPoE-
Click the “PPPoE Config” tab to go to the interface as shown below. Enable PPPoE
and then enter the username and password from your ISP.