VITEK VTC-TNB2LPR
23
motion detection chapter for details.
l
SD Card Error
When there are errors in writing to the SD card, the corresponding alarms will be triggered.
1. Go to Config
à
Alarm
à
Anomaly
à
SD Card Error as shown below.
2. Click “Enable” and set the alarm holding time.
3. Set alarm trigger options. Trigger alarm out, Email and FTP. The setup steps are the same as
motion detection. Please refer to
motion detection
chapter for details.
l
IP Address Conflict
1. Go to Config
à
Alarm
à
Anomaly
à
IP Address Collision as shown below.
2. Click “Enable alarm” and set the alarm holding time.
3. Trigger alarm out. When the IP address of the camera is in conflict with the IP address of
other devices, the system will trigger the alarm out.
l
Cable Disconnection
1. Go to Config
à
Alarm
à
Anomaly
à
Cable Disconnected as shown below.