VITEK VTC-TNB2LPR
35
Either method of network connection can be used. If PPPoE is used to connect internet, the camera
will get a dynamic WAN IP address. This IP address will change frequently. To be notified, the
IP change notification function can be used.
Click “IP Change Notification Config” to go to the interface as shown below.
Trigger Email
: when the IP address of the device is changed, the new IP address will be sent to
the email address that has been set up.
Trigger FTP
: when the IP address of the device is changed, the new IP address will be sent to
FTP server that has been set up.
4.6.2
Port
Go to Config
à
Network
à
Port interface as shown below. HTTP port, Data port and RTSP port
can be set.
HTTP Port
: The default HTTP port is 80. It can be changed to any port which is not occupied.
HTTPS Port
: The default HTTPs port is 443. It can be changed to any port which is not occupied.
Data Port
: The default data port is 9008. Please change if necessary.
RTSP Port
: The default port is 554. Please change if necessary.
4.6.3
Server Configuration
This function is mainly used for connecting network video management system.
