VITEK VTC-TNB2LPR
4
The system will display the above-mentioned textbox to ask you to change the default password.
It is strongly recommended to change the default password for account security. If “Do not show
again” is checked, the textbox will not appear next time.
2.1.2
Directly Access through IE
The default network settings are as shown below:
IP address:
192.168.226.201
Subnet Mask:
255.255.255.0
Gateway:
192.168.226.1
HTTP:
80
Data port:
9008
Use the above default settings when logging into the camera for the first time. Directly connect
the camera to the computer through network cable.
①
Manually set the IP address of the PC. The network segment should be as the same as the
default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to bring up the following window:
Select “Properties” and then select “internet protocol” according to the actual scenario (for
example: IPv4). Next, click the “Properties” button to set the network of the PC.
