VITEK VTC-TNB2LPR
13
Set the format, resolution and quality of the image saved on the SD card and the snapshot interval
and quantity and the timing snapshot here.
Snapshot Quantity
: The number you set here is the maximum quantity of snapshots. The actual
quantity of snapshots may be less than this number. Supposing the occurrence time of an alarm
event is less than the time of capturing pictures, the actual quantity of snapshots is less than the
set quantity of snapshots.
Timing Snapshot
: Enable timing snapshot first and then set the snapshot interval and schedule.
The setup steps of schedule are the same as the schedule recording (See
Schedule Recording
).
4.2
Image Configuration
Image Configuration includes Display, Video/Audio, OSD, Video Mask and ROI Config.
4.2.1
Display Configuration
Go to Image
à
Display interface as shown below. The image’s brightness, contrast, hue, and
saturation for common, day and night mode can be set up separately. The image effect can be
quickly seen by switching the configuration file.
