VITEK VTC-TNB2LPR
36
1. Check “Enable”.
2. Check the IP address and port of the transfer media server in the VMS. Then enable the auto
report in the VMS when adding a new device. Next, enter the remaining information of the
device in the VMS. After that, the system will automatically allot a device ID. Please check it in
the VMS.
3. Enter the above-mentioned server address, server port and device ID in the corresponding
boxes. Click the “Save” button to save the settings.
4.6.4
DDNS
If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1. Go to Config
à
Network
à
DDNS.
2. Apply for a domain name. Take www.vitekivpddns.com for example.
Enter www.vitekivpddns.com in the IE address bar to visit its website. Then Click the
“Registration” button.