VITEK VTC-TNB2LPR
7
Access the camera through PPPoE auto dial-up. The setup steps are as follows:
①
Go to Config
à
Network
à
Port menu to set the port number.
②
Go to Config
à
Network
à
TCP/IP
à
PPPoE Config menu. Enable PPPoE and then enter the
username and password from your internet service provider.
③
Go to Config
à
Network
à
DDNS menu. Before configuring the DDNS, please apply for a
domain name first. Please refer to DDNS configuration for detail information.
④
Open the IE browser and enter the domain name and http port to access.
Ø
Access through static IP
Network connection
The setup steps are as follows:
①
Go to Config
à
Network
à
Port menu to set the port number.
②
Go to Config
à
Network
à
TCP/IP menu to set the IP address. Check “Use the following IP
address” and then enter the static IP address and other parameters.
③
Open the IE browser and enter its WAN IP and http port to access.