Vitalinq 94A-07, Руководство по эксплуатации и установке

Страница: 44 / 47

38
6.3.3 Monitor microphone cable connection
The monitor mic can be connected to the system in several ways. See image on
following page.
Option 1
The monitor mic can be run directly to the jack on the rear of the console labeled MM5 using
an existing available video cable with the supplied BNC to RCA adapter.
Option 2
The monitor mic is connected to an existing coaxial cable routed through the monitor boom
which runs to the ceiling space or equipment room. This cable is then connected to the
provided adapter box with a BNC to RCA adapter. A separate CAT5 cable from the ceiling
space or equipment room can then be daisy chained off the available CAT5 jack of the last
speaker in the procedure room speaker series.
Option 3
A supplied adapter box with adhesive backing can be placed on the rear of the monitor and
the monitor mic can be to it with the supplied BNC to RCA adapter. A separate CAT5 cable
can then be run through the monitor boom to the last speaker in the speaker series of the
procedure room and connected to it’s open CAT5 connector (daisy-chained from the procedure
room speakers).
Option 4
Same as Option 2 except that the CAT5 cable is run back to the console and along with the
white CAT5 cable from the procedure room speakers connected to a provided CAT5 splitter in
the LAB WHITE jack on the rear of the console.
Other connection combinations are possible.