Vitalinq 94A-07, Руководство по эксплуатации и установке

Страница: 47 / 47

41
6.4.2 Rear of console
• Plug foot switch into foot switch jack on the SAME side that you plugged in the headset.
• Plug the Desk Mic into the jack marked FOOT SWITCH OR AUX IN on the opposite side
from the headset. For example, if you plug the headset into the right jack, plug the desk mic
into the left one (marked LEFT FOOT SWITCH OR AUX IN )
• Plug the white Procedure room cable into the jack marked LAB WHITE .
• Plug the blue Control room cable into the jack marked TEK BLUE .
• The jacks marked MM5 , BLACK , YELLOW , or SILVER are used for optional equipment.
• Instructions for using these jacks are included with the equipment.
• The
ANT jack is provided for using an external antenna in weak reception areas.
When a monitor mounted microphone (MM5) is provided, there are many factors that
influence its connections, so there are many options. See 6.3.3 for available options. The
monitor mounted microphone can be directly connected to the MM5 jack with a BNC to RCA
adapter.
• Plug the three conductor power cable into the POWER jack . Don’t plug it in to an AC power
outlet yet.
Proceed to Section 2: “Setting up the VITALINQ™ system”
LEFT
FOOT
SWITCH
OR AUX IN
POWER
NO USER SERVICEABLE PARTS INSIDE
CALL 1-800-319-6014 FOR SERVICE
SECURITY
CABLE
RIGHT
FOOT
SWITCH
OR AUX IN
AUX
LAB
WHITE
MM5 ANT
TEK
BLUE BLACK YELLOW
HEAD
SET
TALK
VITALINQ
94A07
SILVER
S
T
S
L