Vitalinq 94A-07, Руководство по эксплуатации и установке

Страница: 34 / 47

28
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a dry soft cloth. If the faceplate is stained
badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral
detergent off.
Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may damage the
surface or erase characters.
Cleaning the CD Slot
As dust tends to accumulate in the CD slot, clean it every once in a
while. Your CDs can get scratched if you put them in a dusty CD slot.
5 TROUBLESHOOTING GUIDE
VITALINQ™ Communications Troubleshooting Guide
Call us first! We want to hear from you. 1-800-319-6014 or support@vitalinq.com
The communication system between the procedure room and control room is very easy to
repair. All devices unplug for easy replacement.
5.1 Most likely problems
Nothing works.
Check to see that the power cord is plugged in, and that the white (or grey), and blue cables are
plugged into the proper jacks.
No music.
Check to see that the white and blue cables are plugged all the way into the proper jacks. Try a
CD. FM or AM stations may be blocked by the shielding effect of the building. See section 4
for music system operating instructions.
People in Procedure Room hear unwanted speech or noise from Control Room.
If the Console ‘TALK’ switch is up (LED is red) and the desk mic talk bar is depressed or
locked on, the people in the Procedure Room will hear the Control Room via the Control Room
microphone. This will also happen if a headset is connected and the Foot Switch is pressed or it
is unplugged or not plugged in all the way.
Operator can’t hear people in the Procedure Room while wearing Headset.
Verify that Headset LISTEN control is turned clockwise; Verify that Headset plug is in all the
way. Try another Headset. Try plugging the Headset into the other jack on the Console and
adjust its LISTEN control. Verify that the Foot Switch is plugged into the same side jack.
HEADSET AND FOOTSWITCH MUST BE CONNECTED TO OPPOSITE SIDE
FROM DESK MIC CONNECTION. IF HEADSET IS PLUGGED INTO SAME SIDE