Quantum Receiver User Manual
Web GUI Screens
Issue No: A
Page: 44
Ref: ?-Insert_Document_Part_No._Here-?
Copyright © 2021 Vislink is a Vislink Technologies Inc. companies
Figure 6-30
Settings>RF>Channel Plan
The BDC tab specifies power settings for the selected LNBs. The settings will
not be actioned until the Save button has been clicked:
Blockdown Converter Settings
Device – enables selection of the input RF device from the drop-down menu.
Different part numbers identify the frequency range they can receive, which
effects the frequency input to the Demodulator.
LNB 1-4 Power – enables or disables Low Noise Block (LNB) power for the
selected device.
6.3.2.
Decoder
The Settings>Decoder panel details the settings for the unit to decode input
signals.
The Decoder panel provides further tabs for configuration of Low Latency,
Service, Genlock and Analog.
6.3.2.1.
Low Latency
The Settings>Decoder>Low Latency tab specifies the video and audio settings
for low latency decoding.
From the camera to video encoders and the final display, each of the individual
components in a streaming workflow creates processing delays. The choice of
video protocol, used for contribution, and distribution formats, for viewing on a
device, also greatly increases video latency. In addition, the type of error
correction used to counter packet loss and jitter can also add to latency. The
