Vislink DXL5000 RX, Руководство пользователя и техническое руководство

Страница: 20 / 40

3-2 Operating the DXL5000 DXL5000 User and Technical Manual
The DXL5000 transmitter and receiver have nearly identical status and setup screens. This
section describes the graphical user interface (GUI) that applies to either the transmitter or
receiver unless otherwise explicitly unique to one or the other.
The following table shows the DXL5000 GUI tabs, which are described in the following sections.
3.2 Monitoring Radio Status (Status Tab)
The Status tab displays the following informational screens when you select them.
3.2.1 Status–Help
The Help screen displays information about the other Status tab screens.
3.2.2 Status–Identification
The Identification screen displays the following information.
Tab Description
Status Displays information about general settings and the status of the system.
Setup Lets you change or edit system parameters.
Administration Lets the system administrator change user names and passwords.
Alarms Displays system alarm status and lets you customize the severity of errors.
Downloads Lets the system administrator download updated software into the radio.
Logout Logs you out of the web interface.
IP Address Displays the unique network address of the DXL5000.
Subnet
Mask Displays the IP address range of the local network.
Default
Gateway Displays the IP address of the router that the DXL5000 uses to communicate with
remote systems.
Serial
Number Displays the serial number of the DXL5000.
Software
Version Displays the software version (needed when calling for service; see also
Section 3.2.4, Status–Monitor Radio (Receiver Only) on page 3-3).
Site Name Displays the user-defined name of where the DXL5000 is located.
Call Sign Displays the user-defined call sign for the DXL5000 transmitter.
Date
Installed Displays the user-defined date the DXL5000 was installed.
User
Information
1, 2, and 3 Displays any type of information that the system administrator wants to associate
with the radio.