Vislink DXL5000 RX Скачать руководство пользователя страница 2

Страница: 2 / 40

Part number

400571-1

Printed in U.S.A.

Authorized EU representative: Vislink PLC

Quality Certification

Vislink is certified to ISO 9001:2008.

The Vislink trademark and other trademarks are registered trademarks in the United States and/or other countries.

Microsoft®, Windows®, and Internet Explorer® are registered trademarks of Microsoft Corporation in the United States
and/or other countries.

Proprietary Material

The information and design contained within this manual was originated by and is the property

of Vislink. Vislink reserves all patent proprietary design, manufacturing, reproduction use, and sales rights thereto, and
to any articles disclosed therein, except to the extent rights are expressly granted to others. The foregoing does not
apply to vendor proprietary parts. Vislink has made every effort to ensure the accuracy of the material contained in this
manual at the time of printing. As specifications, equipment, and this manual are subject to change without notice,
Vislink assumes no responsibility or liability whatsoever for any errors or inaccuracies that may appear in this manual
or for any decisions based on its use. This manual is supplied for information purposes only and should not be
construed as a commitment by Vislink. The information in this manual remains the property of Vislink and may not be
used, disclosed, or reproduced in any form whatsoever, without the prior written consent of Vislink. Vislink reserves the
right to make changes to equipment and specifications of the product described in this manual at any time without
notice and without obligation to notify any person of such changes.

General Safety Information

The following safety requirements, as well as local site requirements and regulations,

must be observed by personnel operating and maintaining the equipment covered by this manual to ensure awareness
of potential hazards. This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.

About this Manual

This manual is intended for use by qualified operators, installers, and service personnel. Users of

this manual should already be familiar with basic concepts of radio, video, and audio. For information about terms in
this manual, see

Glossary of Terms and Abbreviations

(Part No. 400576-1). Pay special attention to Notes, Cautions,

and Warnings.

Read

Notes

for important information to assist you in using and maintaining the equipment.

CAUTIONS

to prevent damage to the equipment.

WARNINGS

to prevent personal injury or death.

Symbols

The following symbols may be on the equipment or in this manual:

WARNING: General Warning.

Risk of Danger.

Frame or Chassis Ground: Identifies the frame
or chassis terminal.

WARNING: Risk of Electric Shock.

Earth Ground: Identifies the earth ground
terminal.

CAUTION: Electrostatic Discharge.

Possible Damage to Equipment.

Fuse (either icon):
Identifies fuses or their location.

Protective Earth Ground: Identifies any

terminal intended for connection to an

external conductor for protection against elec-
tric shock in case of a fault, or the

terminal on a protective earth electrode.

Waste Electrical and Electronic Equipment
(WEEE): The product must not be disposed of
with other waste. You must dispose of the
waste equipment by handing it over to a desig-
nated collection point for recycling.

101 Billerica Avenue - Bldg. 6

North Billerica, MA 01862-1256 USA

TEL: 800.490.5700 or +1.978.671.5700