Vislink DXL5000 RX, Руководство пользователя и техническое руководство

Страница: 21 / 40

Operating the DXL5000 3-3 DXL5000 User and Technical Manual
3.2.3 Status–Monitor Radio (Transmitter Only)
The transmitter Monitor Radio screen displays the following information.
3.2.4 Status–Monitor Radio (Receiver Only)
The receiver Monitor Radio screen displays the following information.
Operating
Frequency Displays the frequency of the transmitter in MHz.
RF Output
Power Displays the output power in dBm.
PA Voltage Displays the power amplifier voltage.
+15V Displays the +15V system voltage in the DXL5000.
–15V Displays the –15V system voltage in the DXL5000.
+5V Displays the +5V system voltage in the DXL5000.
System
Temp Displays the degrees in Celsius of the DXL5000 operating temperature.
Power
Amplifier Displays whether the power amplifier is ON or OFF.
Test Tone Available only with an internal SCM, displays whether the Test Tone is ON or OFF.
Test Tone should be on only for antenna alignment purposes.
Operating
Frequency Displays the frequency of the receiver in MHz.
RSL Input
Power Displays the receive signal level (RSL) input power in dBm.
+12V Displays the +12V voltage in the DXL5000.
+15V Displays the +15V system voltage in the DXL5000.
–15V Displays the –15V system voltage in the DXL5000.
+5V Displays the +5V system voltage in the DXL5000.
System
Temp Displays the degrees in Celsius of the DXL5000 operating temperature.
RSL Min Displays the minimum RSL.
RSL Max Displays the maximum RSL.