viscount Jubilate 230-232-235-245
4. CONTROLS FOR MANUALS
JUBILATE 230 – 232
22
11. Temperament selector: This drawknob has 7 different positions for 7 different types of tem-
perament. For further informations on the Temperament please refer to chapter 1(Temperament
selector).
12. Reverb potentiometer: This knob can be used to control the amount of reverb you wish to add
to the organ sound. You can use this digital reverb to enhance the sound of your Jubilate in small
rooms with little resonance.
13. Tremulant switch: Use this control to select one of 16 different types of Tremolo effect for
amplitude and modulation of the sound.
14. Memory Bank switch: By turning this knob, one of the six memory banks can be selected.
1. Numbered keyboard: This part of the keyboard (marked by the numbers 0 to 9 and the word
CLEAR) is used to enter the channel number when programming the MIDI channel, or while
sending a Program Change.
2. Set Button: This button turns on the memory function.
3. General memories (HR; 1 - 2 - 3 - 4 - 5 - 6): All register selections made can be stored to
memory. Under the first manual are located 6 general memories. The memories include a push
button called HR, also represented by 0. The HR push button memorize temporarely the last
configuration present at time when the piston was switched on.
To memorise the registers press the cancel button marked with a «C». Choose the register for the
section you want. Press the SET (S) button located on the left under the first manual and, keeping it
down, press one of the 6 memory buttons corresponding to where you want to save this combina-
tion of registers.
In situations where the organ is used by different organists, each player can save their own registra-
tion in a different number of memory bank.
4. Enclosed (ENC): By pressing this button the swell pedal can be used to control the volume of
the whole organ.
