VIPColor VP6 Series, Руководство пользователя

Страница: 34 / 84

34
Using the Printer
Table 8 EWS: Advanced Settings > Advanced Settings 2
EWS Page Description
Printer Pause Settings •
Pause
The printer will print labels at the selected time interval.
•
Print & Present
Move the printhead to the capped position at the selected time interval after
the last print.
•
Multiple Job Queue
Cut the media and move the printhead to the capped position if the next print
job in the queue is not received after waiting for the selected time interval.
•
Out of Ink
Cut the media and move the printhead to the capped position after the
selected time interval if the printer runs out of ink.
•
End of Job
Move the printhead to the capped position at the selected time interval after
printing is completed.
Media Gap Setting • Specify the inter label gap when using continuous media. Click
Submit
to apply
the new value.
• Specify the maximum gap, if using non-standard gap labels. Click
Submit
to
apply the new value. (3 mm or 0.125” is standard for gap labels.)
Fine-tune linefeed
calibration When printing large images, the printed image may be slightly shorter due to the
linefeed. Fine-tune by entering a correction (stretch) factor calculated as follows:
Correction factor = (Printed Length ÷ Image Length) * 1,000,000
Wiper Maintenance
Schedule Specify the time interval for the wiper to clean itself. Use this option in a dry
environment (10% RH or less) to prevent the wiper roller becoming too dry for it
to properly wipe and clean the printhead.
Cut After Print Setting Set the delay before the printer cuts the label after printing it.
Printer Shutdown
Schedule Shut down the printer daily at a specific time. Click
Submit
to save the settings.
Table 9 EWS: Advanced Settings > Import/Export Settings
EWS Page Description
Import Setting Import the Advanced Settings from another printer.
Export Setting Export the Advanced Settings to another printer.