VIPA CP 240 RS232, Руководство пользователя

Страница: 141 / 148

Manual VIPA System 200V Chapter 6 CP 240 - M-Bus
HB97E - CP - Rev. 11/30 6-15
The PLC application has the following structure:
CALL FC 9 //SYNCHRON_RESET
ADR :=256 //Module address
TIMER_NR :=T8 //Delay time for CP
ANL :=M3.0 //CPU start complete
NULL :=M3.1 //Internal flag
RESET :=M3.2 //Initialize reset at CP
STEUERB_S:=DB10.DBB260 //Control bits for Send
STEUERB_R:=DB11.DBB108 //Control bits for Receive
U
M 3.0 //as long as Synchron active
BEB //no processing of CP
CALL FC
100 //M-Bus communication
Adr_CP :=256 //Module address
Baud :=MB100 //Transfer baud rate
C_Field :=MB101 //Transfer value C field
A_Field :=MB102 //Transfer value A field
CI_Field :=MB103 //Transfer value CI field
Data :=MB104 //Transfer telegram length
RET_VAL :=MW106 //Return value
Senden_Start:=M99.0 //Start order
U M
99.0 //Order running
BEB
L
MW 106 //Return of send function
L W#16#2000 //Ready without error
==I
SPB copy
NOP 0
//Error evaluation
BEA
copy: L 0 //Delete ready without error
T MW 106
L MB 102 //Participant address
L 20 //Basic No. for the data-DBs
+I
T
MW 50 //Data block no. for data storage
L 0 //1
st
byte to copy
T MW 188 //Predefine byte counter
loo: L MW 188 //Load byte counter
SLW 3 //x8 is byte address in DB
T MD 184 //Save address
AUF DB 11 //Open receive buffer
L DBB [MD 184] //Value from receive buffer
AUF DB [MW 50]
T DBB [MD 184] //Store in data-DB
L MW
188
+1 //Increase byte number
T MW 188
L DB11.DBW 102 //Last byte to copy
<=I //not all bytes copied yet
SPB loo //then resume
UN M 3.0
S M 3.0 //Set start-up ID
PLC program
OB1
OB 100