Vip2 VK2 -600PTZ, Конфигурация и руководство пользователя

Страница: 9 / 80

3
VK2-600PTZ User manual
2.2 Installation
VK2-600PTZ is for use in surface or pendent mounting applications and the mounting member
must be capable of supporting loads of up to 1.6kg. (Pendent mounting must use pendent mount
accessory.)
VK2-
600PTZ’s mounting bracket should be attached to a structural object, such as hard wood,
wall stud or ceiling rafter that supports the weight of VK2-600PTZ.
CAUTION: Before installing the bracket to surface, adjust the four mounting screws "A"
on the base of the dome camera to best match the mounting bracket locked
position. Unscrew the locking screw on the side of the dome's base and fit the
tab of the mounting bracket into the locking slot. Screws "A" should not be too
tight or too loose when the dome is in the locked position. After setting the
proper positions of screws "A" remove the mounting bracket and install the
bracket onto the required surface. If it is difficult to lock the dome in position
after the mounting bracket has been installed, readjust the screws "A" by
unscrewing them a small amount and try to install dome camera again.