49
VK2-600PTZ User manual
Use the
Joystick
to move and navigate the cursor to the alpha numeric character
table displayed and select the required character with the
(IO/FN)
keys
TITLE EDIT MENU
A01
*
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
ALL DELETE
EXIT(ESC TO EXIT)
2. Select ‘MODE’ - adjust with
(TELE/WIDE)
3. Select
‘SPEED’ - adjust with
(TELE/WIDE)
4. ‘START ANGLE’
Use the
Joystick
to move cursor to START ANGLE Press the
(IO/FN)
key
‘CTRL’ is displayed.
Move the camera to the desired location and the zoom position. Press the
(IC/FF)
and
‘CTRL’
disappears. and START ANGLE is now set. To fine tune the Pan and Tilt position use
Joystick
to move the cursor to the field you wish to change and twist the
Joystick
to adjust
the position in increments of 0.1 degree.
5. ‘END ANGLE’
Use the
Joystick
to move cursor to END ANGLE. Press the
(IO/FN)
key
‘CTRL’ is displayed.
Move the camera to the desired location and the zoom position. Press the
(IC/FF)
and
‘CTRL’
disappears and END ANGLE is now set. To fine tune the Pan and Tilt position use the
Joystick
to move the cursor to the field you wish to change and twist the
Joystick
to adjust
the position in increments of 0.1 degree.
6. Select ‘SCAN DIR’ to CCW or CW – adjust with
(TELE/WIDE)
7. Select ‘SWAP’. Set to ON, to swap the start angle and the end angle - adjust with
(TELE/WIDE)
8. Select ‘DWELL TIME’ - adjust with
(TELE/WIDE)
9.
To save changes highlight ‘SAVE AND EXIT’ and move
Joystick
right.
Joystick
left exits
without saving.
Содержание VK2 -600PTZ
Страница 1: ...VK2 600PTZ Configuration and User manual...
Страница 76: ...70 VK2 600PTZ User manual Figure Dimension...
