NVR Quick Start Guide - Version: NVR-Q320
28
Used in conjunction with Face Detection, Face Recognition can detect people that have been added to a “Face Library”,
and trigger events off this. Generally, this function is used to trigger an action on the recorder when a person in a pre-
determined face list is seen.
Before enabling Face Recognition, ensure that Face Detection is setup first.
Fig. 7.2:
Face Library menu
Fig.7.3:
Face Recognition menu
1. From the Main Menu, select
AI -> Database -> Face Library
.
2. Select
Add
. Give the Face Library a name, and then select
OK
.
7.2 Face Detection & Recognition (cont.)
3. Select
Parameters -> Face Recognition
.
4. Select the channel you wish to setup Face Recognition on. Select
Enable
.
5. Select
Target Face Database Setting
and select the Face Library you created. Select
OK
.
6. Select
Common Mode
or
Stranger Alarm
. Common Mode will detect faces in the Face Library and Stranger Alarm
will detect people not in the Face Library and mark them as strangers.
7.
Configure trigger settings to suit requirements (Refer to
7.4 AI Trigger Actions
).
8. Select
Apply
to save your changes.