Vintec mVRC, Руководство пользователя

Страница: 5 / 48

3
Mounting and Installation
!
WARNING!
Always ensure that all power and auxiliary communications cables are routed
so that they do not present any danger to personnel. Take care when routing cables in
areas where robotic equipment is in use.
Cleaning
WARNING! Risk of electric shock. Always disconnect and isolate the product from the
power supply before cleaning. Do not use solvent or oil-based cleaners, abrasives or wire
brushes. Clean with a dry lint free cloth.
Maintenance
!
WARNING! The fitting of non-approved parts or accessories, or the carrying out of non-
approved alterations or servicing can be dangerous and could affect the safety of the
product. It may also invalidate the terms and conditions of the product warranty.
Safety when Working with Robotic Equipment
In normal operation remote-controlled equipment can move suddenly and without warning. Since
audible warnings are not suitable for use within the studio environment, it is recommended that
only trained personnel be allowed to work in the active areas where remote controlled robotic
equipment is located.
The safe operating zone is a minimum of 1 m (3 ft).
Safety Notes for Operators
Operators must familiarise themselves with the working footprint of the robotic equipment,
including all installed payload items (lens, zoom and focus controls, viewfinder, prompter, etc.) to
prevent inadvertent collisions or injury to personnel.
If personnel are too close to robotic equipment that is about to move, the operator should prevent
the motion from starting or stop the motion if it has started.
We strongly recommend that the operator verifies visually that the active area is clear of hazards
and personnel, both before and during remote operation.
This user guide covers the installation, configuration and operation of the μVRC robotic control
system.
In this user guide, the following symbols are used to indicate useful or important information:
About this User Guide
NOTE : Gives additional important information about the product.
TIP : Gives extra advice and ways to perform a particular step or procedure.