Vingtor Stentofon AlphaCom XE Series Скачать руководство пользователя

Страница: 52 / 68

A100K10805

AlphaCom XE - Installation, Configuration & Operation

Licenses does not limit the duration of single messages or the total

duration of all stored messages.
Upload of Easy Messages and Station Recording features are not

restricted by license. The ASVP module is also active without any

license. The licensing only blocks the messages that can be used.

●

No license

Only ASVP help messages are available (Message Group 10)

Standard ASVP messages by uploading ASVP Software Module

Record own customized messages

●

PA Recall license

(works on AMC-IP v. 10 or 11 hardware)

Delayed group call to prevent feedback

●

Basic Messaging license

(requires AMC-IP v. 11 hardware)

ASVP help messages (Group 10)

1 Auto-Attendant message ( Message Group 11, index 1)

3 Voice Alarm Messages 8191-8193 (Message Group 30, index

1-3)

Recall function. Delayed group call to prevent feedback

Up to 2 Mbyte customized WAV files (Approx. 4 min. 16 sec.

speech)

●

Enhanced Messaging license

(requires AMC-IP v. 11 hardware)

Unlocks all current messaging features

ASVP help messages (Message Group 10)

3 Auto-attendant messages (Message Group 11, index 1-3)

Any number of Voice Alarm Messages (Message Group 30)

Up to 10 Mbyte of customized WAV files (Approx. 21 min. 20 sec.

speech)

Recall function. Delayed group call to prevent feedback

Absence Messages (771 - 779)

Mail Messages (660 - 669)

9.2.4

Supported audio file formats

AlphaCom can only play back WAV container file format with 16kHz

sample rate, single channel (mono), and one of the following three

encodings

● PCM files at 16kHz sample rate (linear 16bit), mono (1 channel).

● MS ADPCM at 16kHz sample rate, mono (1 channel).

● IMA ADPCM at 16kHz sample rate, mono (1 channel)

PCM files need 32 KByte/s. The ADPCMs need 8 KByte/s (same as

G.711/G.722)
Station-recorded Easy Messages are stored as IMA ADPCM.

9.3 Recall

The Recall function lets you record a message from a station and then

dispatch the recorded message as a Group Call.

The function is used to prevent feedback problems when making

Group Calls

-The recorded message is stored temporarily

It is deleted when the group call is finished

The maximum duration of a single recall message is limited to 3

minutes

The total system storage capacity for recall is approx. 40 minutes

9.3.1 Directory numbers

The default directory numbers for “recall” broadcast are:

9084:

Recall to group 1 (all)

9085-9088: Recall to groups 2 - 5

Содержание AlphaCom XE Series





































































Результаты поиска

Содержание AlphaCom XE Series

Отзывы:

Похожие инструкции для AlphaCom XE Series

Бренды по названию

Популярные бренды

Vingtor Stentofon AlphaCom XE Series, Установка, настройка и эксплуатация

Результаты поиска

Содержание AlphaCom XE Series

Отзывы:

Похожие инструкции для AlphaCom XE Series

Бренды по названию

Популярные бренды