Vimar Arke 19493, Инструкция по эксплуатации

Страница: 35 / 38

ENGLISH - 33
1st Phase
- Prepare the control panel for configuration (see the con-
trol panel manual) then connect the battery pack to the
siren. The control panel will display configuration of the
siren device.
2nd Phase
- Close the siren; correct closure of the enclosure is confir-
med by an audible warning (beep) emitted by the siren.
- The siren configuration is then completed by carrying out
the procedure for turning the system on and off; the opera-
tion is then confirmed with audible signals (6 beeps).
Warning : If there is no audible warning, the siren is probably
outside the radio range.
N.B. : The siren emits only one type of audible signal for both
the intrusion alarm and the tamper alarm.