Vimar Arke 19493, Инструкция по эксплуатации

Страница: 28 / 38

26 - ENGLISH
Operation
• In the protected room, it detects a water level higher than
the threshold and signals the technical alarm to the control
panel.
• The detector LED lights up when an alarm is detected.
• Approximately every 30 minutes, the detector sends a
correctly operating signal to the control panel (via radio
interface).
• Anti-sabotage protection: Opening the battery compart -
ment causes the tamper alarm; before changing the
battery it is necessary to set the control panel on
Walktest
.
• Walktest: In this phase, the control panel identifies the type
of detector and provides an indication on the level of radio
reception.
• Flat battery warning: besides the warning on the control
panel, the detector LED blinks.
Configuring the water detector 01744
-
Prepare the control panel for configuring the radio-
frequency devices (see the control panel manual).
- Open the enclosure.