Disassembly
©2010 Viking Preferred Service
29
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless test
procedures require power to be connected. Discharge capacitor through a resistor before attempting to service.
Ensure all ground wires are connected before certifying unit as repaired and/or operational.
Gas Tubing For Bake Burner Removal
Condition Requirements:
Back Panel Removed
DSI Module Accessed
Gas Supply Disconnected
Gas leak hazard.
To avoid risk of personal injury
or death, leak testing of the appliance must
be conducted according to the manufacturer’s
instructions. Before placing appliance in operation,
always check for gas leaks with soapy water solution.
DO NOT USE AN OPEN FLAME TO CHECK FOR
GAS LEAKS.
1. Remove screws and bracket from range.
2. Remove nut and gas tubing from bracket.
3. Mark and disconnect wires from solenoid valve.
4. Remove gas tube from solenoid valve.
5. Reverse procedure for installation.
6. Perform gas leak test.
Gas Tubing For Broil Burner Removal
Condition Requirements:
Back Panel Removed
DSI Module Accessed
Gas Supply Disconnected
Gas leak hazard.
To avoid risk of personal injury
or death, leak testing of the appliance must
be conducted according to the manufacturer’s
instructions. Before placing appliance in operation,
always check for gas leaks with soapy water solution.
DO NOT USE AN OPEN FLAME TO CHECK FOR
GAS LEAKS.
1. Remove nut from broil burner and gas tubing.
2. Mark and disconnect wires from solenoid valve.
3. Remove gas tube from solenoid valve.
4. Reverse procedure for installation.
5. Perform gas leak test.
Содержание DCCG130
Страница 35: ...2010 Viking Preferred Service 35...
Страница 36: ...36 2010 Viking Preferred Service...