6
MODEL VG06045
INSTALLATION STEPS
A. INSTALLING THE BOTTOM STRUCTURAL RAIL
Key Note: There is an arrow marker on the
bottom structural rail (#9). This is the
installation point of the fixed panel holder
(#7). See the chart to determine the
distance from the center of hole to the
finished wall. When placed for the dry fit
process or installation, this sticker should be
on the inside portion of the shower stall.
There is also a marker on the bottom
structural rail (#9) called "Door Side". This
indicates the door side location. Note that
part #9 is reversible based off the
configuration desired. This is also the only
side of the rail that can be cut. Dry fit all
steps prior to installation.
1. Ensure that the bottom wall mount brackets
(#1A) are on both ends of the bottom
structural rail (#9). Place the structural rail
into the fixed panel holder (#7) opening. If
the structural rail is too long, cut it with a
hacksaw until it fits the opening.
NOTE: Remove part #1A prior to cutting
and make sure to only cut the door side
portion of the structural rail.
A1
9
FIXED PANEL HOLDER
ARROW MARKER
VIEW FROM THE INSIDE
DIMENSION TO FINISHED WALL
MODEL
48X74
60X74
64X74
50X74
62X74
22 3/4" (577.5mm)
23 3/4" (603mm)
28 3/4" (730mm)
29 3/4" (755.5mm)
30 3/4" (781mm)
9
1A