MODEL VG06045
7
9
7
9
1A
LEVEL
1A
SCREW COUNTER CLOCKWISE
TO LOOSEN FOR ACCESS TO
MOUNTING CLIP
MOUNTING CLIP
HOUSING
2. Position the structural rail correctly using a
level. Mark the location of the wall mount
brackets (#1A) on the wall. Make sure that
the allen screws are facing towards the
inside of the shower stall. Mark the location
of the fixed panel holder (#7) on the floor
using the arrow marker on the structural rail
as a guide.
3. Remove the structural rail and fixed panel
holder. Drill holes into the respective marks
and insert plastic anchors (#16) inside them.
Not necessary if installing into studs. Studs
are the preferred means of installation,
anchors can pull out of the wall causing
property damage and bodily harm.
Note
that the housing to part (1A) will need to
be unthreaded in order to install the
mounting clips.
A2
A3
7
10mm
1A
