Vig395P Motherboard Manual
96
2.
Select the desired disk and press <
Enter>
. The following screen appears:
To format a disk:
Note:
The operation of Formatting Disk allows you to perform a low-level formatting of
a hard drive by writing zeros to the entire disk. Serial ATA drives are low-level
formatted at the factory and does not need to be low-level formatted again.
1. When the screen shown below displays, select
Format Disk
and press
<Enter>
.
The following screen appears:
Figure 70:
Formatting Disk
2. Read the warning message when it appears in the screen as shown below. To
continue with disk formatting, select
Yes
and hit
<Enter>.
Otherwise, select
No
and
press
<Enter>
.
CAUTION!!
Formatting a disk destroys all data on the drive. Be sure to back up your data
before formatting a disk.
