Vig395P Motherboard Manual
113
•
PCI Configuration
Access the submenu to make changes to the following settings for PCI devices.
Onboard GLAN1/Onboard GLAN2 (Gigabit- LAN) OPROM Configure
Enabling this option provides the capability to boot from GLAN. The options are
Disabled
and Enabled.
PCI Parity Error Forwarding
The feature allows SERR and PERR errors detected in PCI slots to be sent (forwarded)
to the BIOS DMI Event Log for the user to review. The options are Enabled and
Disabled
.
Reset Configuration Data
If set to Yes, this setting clears the Extended System Configuration Data- (ESCD) area.
The options are Yes and
No
.
Frequency for PCI-X#2-#3
This option allows the user to change the bus frequency for the devices installed in the
slot indicated. The options are
Auto
, PCI 33 MHz, PCI 66 MHz, PCI-X 66 MHz, PCI-X
100 MHz, and PCI-X 133 MHz.
•
Slot1 PCI 33MHz, Slot2 PCI-X 133MHz, Slot3 PCI-X 133MHz,
Slot4 PCI-Exp x4, Slot5 PCI 33MHz, Slot6 PCI-Exp x16
Access the submenu for each of the settings above to make changes to the following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options are
Enabled
and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master. The
options are
Enabled
and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefit from a greater clock rate. The options are
Default
,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novell and other
Operating Systems, please select the option: other. If a drive fails after the installation
of a new software, you might want to change this setting and try again. A different OS
requires a different Bus Master clock rate
.
Large Disk Access Mode
This setting determines how large hard drives are to be accessed. The options are
DOS
or Other (for Unix, Novelle NetWare and other operating systems).
