Vig395P Motherboard Manual
22
Overview of Jumper Settings
The VIG395P Motherboard contains the latest technology to offer an almost jumper
less configuration. All Xeon CPU’s are automatically detected and the Speed is
automatically set from the information provided by the CPU.
CAUTION!!
1. Never remove jumpers using large pliers as this can damage the pins. The
best way to remove a jumper is to use a small pair of tweezers or fine needle-
nosed pliers.
2. Do not move the jumper with the power on. Always turn off the power and
unplug the power cord from the computer before changing a jumper, taking
all necessary anti static precautions
System Board Jumper Settings
The following figure shows the jumper locations of the Motherboard. Please refer to the
following tables describing each jumper’s configuration.
Explanation of Jumpers
To modify the operation of the Motherboard, jumpers can be used to choose between
optional settings. Jumpers create shorts between two pins to change the function of the
connector. Pin 1 is identified with a square solder pad on the printed circuit board.
Note:
On two pin jumpers, “Closed” means the jumper is on and “Open” means the
jumper is off the pins.
Figure 6:
Explanation of jumpers
