Vig395P Motherboard Manual
119
•
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify to redirect the console to Onboard COM A or Onboard
COM B. This setting can also be
Disabled
.
BAUD Rate
This item allows you to select the BAUD rate for console redirection. The options are
300, 1200, 2400, 9600,
19.2K
, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to choose from the available options to select the console type for
console redirection. The options are VT100, VT100, 8bit, PC-ANSI, 7bit,
PC ANSI
,
VT100+, and VT-UTF8.
Flow Control
This item allows you to choose from the available options to select the flow control for
console redirection. The options are: None, XON/XOFF, and
CTS/RTS
.
Console Connection
This item allows you to choose select the console connection: either
Direct
or Via
Modem.
Continuing Console Redirection after POST
Choose whether to continue with console redirection after the POST routine. The
options are On and
Off
.
•
Hardware Monitor Logic 1
Note:
The Phoenix BIOS will automatically detect the type of CPU(s) and
hardware monitoring chip used on the Motherboard and will display the
Hardware Monitoring Screen accordingly. Your Hardware Monitoring Screen may
look like Hardware Monitor Logic 1 or Hardware Monitor Logic 2, depending on
the type of CPU(s) and HW Monitoring chip you are using.
CPU Temperature Threshold
This option allows the user to set a CPU temperature threshold that will activate the
alarm system when the CPU temperature reaches this pre-set temperature threshold.
The hardcode default setting is
75°C
.
