83
3
-
5.4 Status
Parameter
Descriptions
After the IGMP Snooping configuration is completed, the switch can display the
IGMP Snooping Status. The section provides the IGMP Snooping detail status.
Web Interface
To display the IGMP Snooping status in the web interface:
1.
Click Configuration, IGMP Snooping, Status.
2.
If you want to auto
-
refresh the information, then
you need to evoke the
“Auto
-
Refresh”
.
3.
Click “Refresh” to refresh the IGMP Snooping Status.
4.
Click “ Clear“ to clear the IGMP Snooping Status.
Figure 3-5.4: The IGMP Snooping Status.
The VLAN ID of the entry.
Querier Version:
Working Querier Version currently.
Host Version:
Current Working Host Version.
Querier Status:
Shows the Querier status is "ACTIVE" or "IDLE".
Queries Transmitted:
The number of Transmitted Queries.
Queries Received:
The number of Received Queries.
V1 Reports Received:
The number of Received V1 Reports.
V2 Reports Received:
The number of Received V2 Reports.
V3 Reports Received:
The number of Received V3 Reports.
V2 Leaves Received:
The number of Received V2 Leaves.
Port:
Switch port number.
Status:
Indicates whether specific port is a router port or not.
Auto
-
refresh:
To evoke the auto
-
refresh icon then the device will refresh the log
automatically.
Upper right icon (Refresh, clear):
Click “Refresh” to refresh the status or clear them
manually.
