182
3
-
16.2 Sampler
You can set or edit the sFlow sampler to meet your requirements
based on a
defined sampling rate. An average of 1 out of N packets/operations is randomly
sampled. This type of sampling does not provide a 100% accurate result, but it does
provide a result with quantifiable accuracy.
Web Interface
To configure the sFlow Agent in the web interface:
1.
Click Configuration, sFlow Agent, Sampler.
2.
Click the
to edit the sFlow sampler parameters.
3.
Scroll to Sample Type to choice with None, Tx, Rx or All.
4.
Click “Save” to save the setting.
5.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
Figure 3-16.1: The sFlow sampler Configuration
