51
3
-
2.2 Rate Limiters
Parameter
Description
The section describes how
to configure the switch’s ACL
rate limiter parameters.
The
“
Rate Limiter Level
”
from 1 to 16 allows the user to set the rate limiter value
and units with pps or kbps.
Web Interface
To configure ACL Rate Limiter in the web interface:
1.
Click Configuration, ACL, and then Rate Limiter.
2.
Specify the “Rate” field. The range is from 0 to 3276700.
3.
Scroll the “Unit” to pps or kbps.
4.
Click “Save” to save the setting.
5.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
Figure 3-2.2: The ACL Rate Limiter Configuration
Rate Limiter ID:
The rate limiter ID for the settings contained in the same row.
Rate:
The allowed values are: “0
-
3276700” in pps or “0, 100, 200, 300... 1000000” in
kbps.
Unit:
Specifies the rate unit. The allowed values are:
Pps:
Packets per second
Kbps:
Kbits per second
Buttons
Apply
– Click to apply changes.
Reset
-
Click “Reset” to undo any changes made locally and revert to
previously saved values.
