172
3
-
15.9 DSCP
Classification
Parameter
Description
The section describes how to configure and map the DSCP value to a QoS class and
DPL value. The settings relate to the currently selected stack unit, as reflected by the
page header.
Web Interface
To configure the DSCP Classification parameters in the web interface:
1.
1.Click Configuration, QoS, DSCP Classification.
2.
Scroll to set the DSCP Parameters.
3.
Click “Save” to save the setting.
4.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
Figure 3-15.9: The DSCP Classification Configuration
QoS Class:
Available QoS Class value ranges from 0 to 7. QoS Class (0
-
7) can be
mapped to followed parameters.
DPL:
Drop Precedence Level (0
-
1) can be configured for all available QoS Classes.
DSCP:
Select DSCP value (0
-
63) from DSCP menu to map DSCP to corresponding QoS
Class and DPL value
Buttons:
Apply
– Click “Apply” to save changes.
Reset
-
Click “Reset” to undo any changes made locally and revert to
previously saved values.
