233
4
-
7 Port Security
4
-
7.1 Limit Control
This section helps you configure the port security settings of the switch. You can use
the port security feature to restrict input to an interface by limiting and identifying
MAC addresses.
This section helps you configure the port security settings of the switch. You can use
the port security feature to restrict input to an interface by limiting and identifying
MAC addresses.
Web Interface
To configure a System Configuration of Limit Control in the web interface:
1.
Select “Enabled” in the Mode of System Configuration.
2.
Checked
“
Aging Enabled
”
.
3.
Set
“
Aging Period
”
(The default is 3600 seconds).
To configure a Port Configuration of Limit Control in the web interface:
1.
Select “Enabled” in the Mode of Port Configuration.
2.
Specify the maximum number of MAC addresses in the Limit of Port
Configuration.
3.
Set
“
Action
”
(Trap, Shutdown, Trap & Shutdown.
4.
Click “Apply”.
Figure 4-7.1: The Port Security Limit Control Configuration
