Weitere Einstellungen
21
Accessing Temperatures and the Operating Status
Depending on the system componentry and performed system adjustments you can
access current temperatures and the operating status:
H
Holiday mode (if programmed)
with departure and return date
H
Outside temperature
H
Supply temperature
*1
H
Boiler water temperature
H
DHW temperature
*1
H
Return water temperature
*1
H
Room temperature
H
Flue gas temperature
*1
H
Burner operating hours
H
Number of burner starts
H
Fuel consumption (if coding was
performed by heating contractor)
H
Time
H
Date
H
Burner On/Off
H
Heating circuit pump On/Off
H
DHW recirculation pump On/Off
H
Circulation Pump On/Off
H
Language
*1
Only if appropriate sensor is installed.
Outside Temperature
i
º
C
1. Open flip-down cover of remote
control.
2.
to scan;
outside temperature is
displayed.
3. /
for further scanning.
4.
to end scanning;
display now indicates the
time.
5. Close flip-down cover of remote
control.
Altering Factory Default Setting
Proceed as follows if you would like to change the factory default setting:
Outside Temperature
i
º
C
1.
press;
outside temperature is
displayed.
2. /
to select.
3.
to confirm.
Selection:
Outside temperature
Supply temperature
*1
Boiler water temperature
DHW temperature
*1
Return water temperature
*1
Room temperature
Flue gas temperature
*1
Time
Date
*1
Only if appropriate sensor is installed.
51
67
50
5
