16
Altering/Accessing the Time Program for DHW Production
(continued)
Setting individual heating cycles each day of the week
Automatic?
1
Time Prog. DHW
1---7
M
Time Prog. DHW
Mo
1. Open flip-down cover of remote
control.
2.
for “Time Program DHW“,
wait until display shown on
the left appears.
3.
for “Individual?”.
4.
to confirm.
5.
/
for selecting the day of the
week when switching
should take place.
6.
for “DHW Heating Cycle
1”.
7.
for “DHW Heating Cycle 1
On”
8.
/
for entering the start of
Cycle 1.
9.
to confirm;
the display will switch to
“DHW Heating Cycle 1
Off”.
10. /
for entering the end of
Cycle 1.
11.
to confirm;
the display switches to
“DHW Heating Cycle 2
On”.
12. For setting starting and ending
times for Cycles 2 to 4 proceed as
described in steps 6 to 10 .
13. Close flip-down cover of remote
control.
If you would like to terminate the
heating cycle settings prematurely,
press
again.
If you would like to skip a heating
cycle, press .
Once the last setting is confirmed
with
the display will show the
current time.
51
67
50
5
