13
Accessing/Altering the Time Program for Space Heating
(continued)
Setting individual heating cycles each day of the week
Time Prog. Heating
1
1---7
Time Prog. Heating
Mo
1
Mo
1
1. Open flip-down cover of control
unit.
1
2.
for “Time Prog. Heating“,
wait until display shown on
the left appears.
1
3. /
for selecting the day of the
week when switching
should take place.
1
4.
for “Heating Cycle 1”.
1
5.
for “Heating Cycle 1 On”.
1
6. /
for entering the start of
heating cycle.
1
7.
to confirm;
the display switches to
“Heating Cycle 1 Off”.
1
8. /
for entering the end of the
heating cycle.
1
9.
to confirm;
the display changes to
“Heating Cycle 2 On”.
10. For setting starting and ending
times for Cycles 2 to 4 proceed as
described in steps 6 to 10.
11. Close flip-down cover of remote
control.
Accessing heating cycles
Proceed as described above with the
exception of pressing buttons
and
.
Overview of heating cycles
1. Open flip-down cover of remote
control.
2. Press
and
simultaneously;
the selected cycles for the given day
are shown on a time line.
3. Close flip-down cover of remote
control.
If you would like to terminate the
heating cycle settings prematurely, press
again.
If you would like to skip a heating
cycle, press .
Once the last setting is confirmed
with
the display will show the
current time.
51
67
50
5