Einstellungen Warmwasserbereitung
18
Altering the Time Program for the DHW Recirculation Pump
The time program consists of 4 heating cycles. In the factory default setting, cycle
1 is set for every day of the week from 05:30 to 22:00 hrs; during this time period
the domestic hot water recirculation pump is running.
Aside from cycle 1 the automatic mode is preselected, which means that the
domestic hot water recirculation pump is running simultaneously to the DHW time
program.
The following options are available to you to set the heating cycles to your liking:
H
By selecting the corresponding heating cycles the domestic hot water
recirculation pump can be activated and deactivated up to four times a day.
H
You can select the same heating cycle or individual cycles for each day of the
week.
The domestic hot water recirculation pump should only be activated when you
require domestic hot water.
Setting the same heating cycles for each day of the week
Automatic ?
Time Prog. DHW Recirc.
Pump
1
1---7
1
1---7
1. Open flip-down cover of remote
control.
2.
for “Time Program DHW
Recirculation Pump”,
wait until display shown on
the left appears.
3.
for “Individual?”
4.
to confirm.
5.
for “DHW Recirculation
Pump Cycle 1”.
6.
for “DHW Recirculation
Pump Cycle 1 On”.
7.
/
for entering the start of
Cycle 1.
8.
to confirm;
display switches to “DHW
Recirculation Pump Cycle 1
Off”.
9.
/
for entering the end of
Cycle 1.
10.
to confirm;
display switches to
“DHW Recirculation Pump
Cycle 2”.
11. For setting starting and ending
times for Cycles 2 to 4 proceed as
described in steps 5 to 10 .
12. Close flip-down cover of remote
control.
Accessing heating cycles
Proceed as describe above, with the
exception of pressing buttons
and
.
Overview of heating cycles
1. Open flip-down cover of remote
control.
2. Press
and
simultaneously;
the selected cycles are shown on a
time line.
3. Close cover of remote control.
If you would like to terminate the
heating cycle settings prematurely,
press
again.
If you would like to skip a heating
cycle, press .
Once the last setting is confirmed
with
the display will show the
current time.
51
67
50
5
