Note
Depending on the system equipment level, an EM-P1 extension
(accessories) may be required to connect the DHW circulation
pump. See Vitodens system schemes at
Filling device with pipe separator
Part no. 7356492
Can be combined with all connection sets and assembly kit with
mixer
■ For surface mounting
Filling device with pipe separator
Part no. 7356902
Can be combined with all connection sets and assembly kit with
mixer
■ For flush mounting
Safety assembly to DIN 1988
DN 15
Components:
■ Shut-off valve
■ Non-return valve and test connector
■ Pressure gauge
■ Diaphragm safety valve
For on-site surface mounting
■ 10 bar (1.0 MPa)
Part no. 7219722
■
a
6 bar (0.6 MPa)
Part no. 7265023
For flush mounting in conjunction with connection set
■ 10 bar (1.0 MPa)
Part no. 7351842
■
a
6 bar (0.6 MPa)
Part no. 7351840
Connection bend for condensate drain
Part no. 7461025
Connection line from the appliance: DN 20
Drain connection: DN 40
Neutralising system with wall mounting bracket
Part no. ZK03652
With neutralising granulate
200
300
361
61
61
131
Neutralising granulate
Part no. ZK03654
2.5 kg
To match the neutralising system, part no. ZK03652
Condensate lifting system
Part no. ZK02486
Automatic condensate removal pump for condensate with a pH
value of ≥ 2.8 from gas condensing boilers
Components:
■ Condensate container 2.0 l
■ Centrifugal pump
■ Non-return valve
■ Connecting cable (1.5 m long) for fault messages
■ Power cable (1.5 m long) with plug
■ 4 connection apertures
7
30 mm for condensate drain with con-
nector
7
max. 40 mm)
■ Drain hose
7
10 mm (5 m long)
Installation accessories
(cont.)
VITODENS
VIESMANN
79
5853906
7
Содержание Vitodens 200-W B2HE
Страница 154: ...154 VIESMANN VITODENS...
Страница 155: ...VITODENS VIESMANN 155 5853906...