5726 783
PYROMAT DYN45 - DYN85 Issue 1.0
Page 51 of 72
Screen
number
Parameters
Factory setting
02 Switch-on
delay:
The release occurs after the time set has
elapsed.
15 minutes
03
Switch-on temperature system target
temperature:
If the system temperature drops below the
system target temperature by this value then the
switch-on delay (figure number 2) starts to run.
-15°C
04
Switch-off temperature system target
temperature:
Switch-off differential for parallel operation and
accumulator charging set to NO.
-5°C
05
Boiler flow, maximum:
80°C
06
Boiler flow, minimum:
20°C
07
Return temperature target:
Set target value for return temperature.
50°C
08 Load
storage:
Should the storage be heated up by the auxiliary
heat generator?
No
09
Load storage to:
Up to which heat storage sensor should the
storage be loaded?
Storage top
10
Load storage to:
Up to which temperature on the selected
storage sensor should the auxiliary heat
generator heat the storage?
70°C
12
Service function, auxiliary heat generator
Maintenance function for specialists.
13
Operating hours counter, solar