5726 783
PYROMAT DYN45 - DYN85 Issue 1.0
Page 23 of 72
5.3 F3 key "PYROMAT Parameter"
It may be necessary to alter the settings:
when the fuel is changed
when the heating system is adapted and optimised
L
Alterations must only be carried out in conjunction with your installation specialists.
Adjustable parameters
Screen
number
Parameters
Factory setting
01 Storage
temperatures:
Display all storage temperatures.
-
02 Boiler
return:
Preserve boiler return target value.
70°C
03 Boiler
flow:
Storage loading temperature target value.
80°C
04
Boiler exhaust gas:
Limit value maximum exhaust gas temperature.
200°C
05
Exhaust gas residual O2:
Residual oxygen target value for air vent control.
7%
06 O2
regulation:
Switch on/off oxygen control.
ON
07
Air vents without O2 control:
Position of the air vents with oxygen regulation
switched off.
30%
08
Dissipate excess heat at:
Limit temperature at which excess heat will be
dissipated.
95°C
12
Minimum system target temperature:
Minimum flow temperature for customer-
installed heat distribution.
L
Parameter is only available if system
minimum target temperature is activated in
the maintenance menu with "YES".
50°C
14
Load storage with automatic operation up to:
Up to which heat storage sensor should the
storage be loaded?
Storage bottom
15
Load storage with automatic operation up to:
Up to what storage temperature should the
storage be heated in automatic mode?
80°C
16
Storage management storage temperature -
medium:
Target value average storage temperature: The
boiler's output will be reduced in accordance
with the storage loading.
80°C