Page 58 of 72
PYROMAT DYN45 - DYN85 Issue 1.0
5726 783
7.4.2 Clean bottom ash pan (2)
1. Open cleaning door:
Release catch and fold cover away to the side,
2. Visual check of seals:
Check for wear and damage and replace if necessary.
3. Pull out ash pan and remove ash in suitable container.
4. Clean ash pan with hand brush or special vacuum cleaner (optional).
5. Insert ash pan and close cleaning door.
6. Turn lock until cover is sealed closed.
L
Ensure that all cleaning doors and cover are sealed closed! A poorly closed
cleaning lid can lead to a poor combustion.
7.4.3 Clean sight glasses (3)
Fig. 14
Sight glass, side, light barrier
Malfunction due to misaligned light barrier!
The light barrier is accurately set during commissioning - loosening the light barrier or the
cover can change the light barrier setting.
Caution!
1. Under no circumstances loosen the cover in order to unscrew the sight glasses.
1. Unscrew the collar with the sight glass and clean the interior of the viewing duct.
2. Clean the sight glass with commercially available soapy water.
L
Replace sight glasses when these are tarnished by flue gas or ash deposits and
can no longer be cleaned with soapy water.
3. Screw the sight glass with the collar onto the pipe without tilting it.
